Emergency Power System Scheme
Overview
- Article 6.2.1 of GB 51348-2019 "Civil Building Electrical Design Standard (Description of Provisions)" stipulates as follows: Emergency Power Supply (Emergency Power Supply), referred to as EPS, is a power supply equipment composed of power converter, energy storage device (battery) and transfer switch (electronic or mechanical). When the AC input power is normal, the AC input power is directly output through the transfer switch.
- The AC input power simultaneously charges the battery pack through the converter. In case of interruption (such as power interruption, voltage does not meet the power supply requirements), EPS uses the energy storage discharge of the battery pack to pass through the inverter transformation, and automatically switches to the emergency state to supply power to the load through the transfer switch.
Our advantage
01
Reasonable equipment layout, good seismic resistance and sealing performance, high reliability and stability;
02
The equipment adopts imported IPM intelligent power module assembly, good reliability and high safety;
03
The equipment can realize fire linkage control according to user requirements, and can set a main and a standby dual power input power supply system automatic switching;
04
The equipment adopts the plug-in design process, which is flexible in assembly and convenient in debugging and installation;
05
The panel adopts backlit LED liquid crystal display, with multi-channel analog, switch monitoring and protection functions, real-time display of operating status;
Technical parameters
- Main Technical Parameters of Products
Model |
LY S-100~1500KVA |
|
Charger |
Input mains power |
AC380V(±15%)、50Hz±3% |
Charging voltage |
DC400V-DC1000V |
|
Charging current |
3-20A |
|
Charging method |
Automatic conversion between equalization and float charging |
|
Storage battery |
Rated voltage |
DC400V-DC1000V |
Backup time |
≥ 90 minutes, 30, 60, 90, and 120 minutes can be selected according to demand |
|
Charging time |
< 24h |
|
Emergency inverter |
Emergency voltage |
AC220/380V(±15%)、50Hz±3% |
Output waveform |
Sine wave (THD ≤ 5%) |
|
Overload capacity |
≤ 120% normal operation |
|
Protection function |
Protection against overcharging, short circuit in charging circuit, over discharge, overvoltage, undervoltage, etc |
|
Emergency switching |
Mechanical switching ≤ 0.25s, static electronic switching ≤ 3ms |
|
Other Solutions
Industrial and commercial energy storage system scheme
Uninterruptible power supply system scheme
AC-DC system scheme